XFX nForce 750a - Chipset

- 21 -
XFX nForce 750a Motherboard User's Guide
►
PCIPnP
Clear NVRAM
This item for clearing NVRAM during system boot.
Optional: Yes, No
Plug & Play O/S
This item lets the BIOS congure all the devices in the system or lets the operating
system congure plug and play (PnP) devices not required for boot if your system has
a Plug and Play operating system.
Optional: Yes, No
PCI Latency Timer
This item sets value in units of PCI clocks for PCI device latency timer register.
Optional: 32, 64, 96, 128, 160, 192, 224, 248
Allocate IRQ to PCI VGA
This item assigns IRQ to PCI VGA card if card requests IRQ or doesn't assign IRQ to
PCI VGA card even if card requests an IRQ.
Optional: Yes, No
Palette Snooping
This item informs the PCI devices that an ISA graphics device is installed in the system
so the card will function correctly.
Optional: Disabled, Enabled
►
Chipset
Click <Press Enter> key to enter its submenu, that can select primary graphics adapter
from optional items, or set Internal VGA or External VGA CARD to display.
• The LED of HYBRID_LED will gliter if the option of "iGPU and Ext-VGA Selection"
be selected "Both Exist and iGPU" and PCIE2 socket be installed exterend card.
►
Onboard Device
Click <Press Enter> key to enter its submenu, it will be dispay south bridge
chipset conguration, and these items can set LAN, USB, AUDIO, HDMI/DVI and PCIE
function from AUTO or Enabled or Disabled states.
BIOS SETUP UTILITY
Advanced
Advanced Chipset Settings PCI VGA Card First
Internal VGA First
PCIE VGA Card First
←
Select Screen
↑↓
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Primary Graphics Adapter [PCIE VGA Card Firs]
iGPU and Ext-VGA Selection [Both Exist and iGPU]
iGPU Frame Buer Detect [Disabled]
iGPU Frame Buer Size [256MB]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.