XFX nForce 750a User Manual

- 24 -
XFX nForce 750a Motherboard User's Guide
4.5.7 JUSTw00t! Setting (OverClock Settings)
►
ACPI Conguration
These options allow you to manage General/Advanced/Chipset ACPI Conguration, for the
Gerneral ACPI Advanced Conguration, Suspend mode there are three mode for selection,
S1(POS), S3(STR), and AUTO, the function explains to following:
S1 (POS): Enables the system to enter the ACPI S1 (Power on Suspend) sleep state (default),
In S1 sleep state, the system appears suspended any stays in a low power mode. The system
can be resumed at any time.
S3 (STR): Ehables the system to enter the ACPI S3 (Suspend to RAM)sleep state. In S3 sleep
state. When signaled by a wake-up device or event, the system resumes to its working state
exactly where it was left off.
►
APM Conguration
Click <Press Enter> key to enter its submenu, APM Conguration Template Manager allows
you to manage Power Managerment default or custom conguration templates.
►
PC Health
Click <Press Enter> key to enter its submenu, it will be display hardware health
conguration, including System temperature, CPU temperature, FAN speed and all kinds
of voltages.
BIOS SETUP UTILITY
Main Advanced
Boot
Security
Power
JUSTw00t!
Exit
Over Voltage and Clock Setting To Enable/Disable
Onboard PCIE LAN BootR
←
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Frequency/Voltage Control
LAN1 BootROM Control [Disabled]
►
Memory Conguration
CPU Voltage Control [Auto]
DRAM Voltage Control [Auto]
Chipset Voltage Control [Auto]
Memory 2T Mode [2T Mode]
CPU/LDT Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]
SATA Spread Spectrum [Disabled]
iGPU Spread Spectrum [Disabled]
►
Hyper Transport Conguration
CPU Frequency,MHz [200]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
These options allow you to manage LAN BootRom Contor, CPU Voltage Control, Dram
Voltage, Chipset Voltage Contorl, Memory Mode, and so on...
And the option of CPU Frequency, MHz allows you overclock CPU clock, the Min is
200MHz, the Max is 400, press "+" or "-" to select clock.

XFX nForce 750a Specifications

General

Brand	XFX
Model	nForce 750a
Category	Motherboard
Language	English