EasyManua.ls Logo

XHDATA D808 - Warning; Quick Start Guide; Functions & Operations Explained; FM Tuning Range- [ FM ] Button

XHDATA D808
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Warning
Do not expose the radio to water, moisture or excessive humidity.
Operating temperature range is 0°- 40°C (32°—104°F).
Remove the battery immediately if liquid has been spilled or debris have fallen into the unit .
Clean with a dry cloth. Don’ t use detergents or chemical solvents.
Do not attempt to open the unit. This prevents damage to sensitive components.
QUICK START GUIDE
Options and Setu
1. Install 1 x 18650 battery in the battery compartment, taking care to align the polarity of the
battery (+/-) .
2. Turn on the radio by pressing the [POWER] button and then press any button to skip the sleep
time setting.
3. Adjust the volume by rotating the [VOLUME] knob on the left side of the radio. Rotate the
small wheel up for more volume and down for less volume.
4. Select band by pressing the band button —— FM, MW, SW or AIR Band.
5. Rotating the [TUNING] knob on the upper right side to locate a desired station or by directly
tuning to a station:
a) First, select a band FM,MW,SW or Air Band.
b) Quick press the [FREQ] button
c) Enter the frequency on the keyboard
d) If the radio does not tune to the frequency, press [FREQ] button again to complete the entry.
When the battery is fully charged, the battery will power off automatically. If the screen doesn’t
display, please take the battery out and install again, or charge for the radio until the screen
display.
In this manual, the terms press and long press are used. "Press" means to press the
button briefly. "Long press" means to press the button and hold it for 2 seconds. When making
settings, wait a few seconds after making the setting and the radio will save the setting and
exit setting mode.
FUNCTIONS & OPERATIONS EXPLAINED
p
5
1. FM Tuning range—— [ FM ] button
The radio can be set for different tuning ranges that are convenient for FM broadcasting in
different regions of the world. With the radio off, long-press the [FM] button. The current setting,
showing the lowest frequency of the band, is displayed.
To change the setting, press the FM button again to cycle through the four options:
64.0 MHz
76.0 MHz
87.0 MHz
87.5 MHz

Related product manuals