Xiaomi 1S - Direct Connection Setup and Printing; Direct Connection for Apple and Android Devices; Direct Connection for Windows Devices

1 Enabling the direct connection function
Direct Connection Seings and Printing
Direct Connection for Apple and Android Devices to the Printer
Direct Connection for Windows Devices to the Printer
2
Enabling the direct connection function
1
Downloading & installing driver
3
Connecting to Wi-Fi
2
5
Printing
Note: You can connect your device with the printer via this function without a router.
Press and hold the direct connection buon for 3 seconds. When the
direct connection indicator blinks orange, the printer is awaiting
connection.
Connecting to Wi-Fi
Enable the wireless network of the device, and select "Xiaomi Photo
Printer 1S [XXXX]". Check the printer's hotspot password on the barcode
label at the boom of the printer, and enter the password to connect
the printer to the device. Aer the device is successfully connected to
the printer, the direct connection indicator will remain blue.
3
Printing
Open the album, and select the photos you want to print. Tap Print,
and select the printer named "Xiaomi Instant Photo Printer 1S [XXXX]"
to print.
Notes:
In the wireless network name and the printer name, "XXXX" is the last four digits
of the serial number, which can be found on the barcode label at the boom of
the printer.
The printer's hotspot is for printing only and does not support Internet access.
Aer the Android device is connected to the printer's hotspot, its mobile
network cannot work.
If the photo print function is not accessible on the album of your Android phone,
please visit hps://mopria.org/print-from-android to download the app, and learn
how to print.
·
·
·
·
Go to “hp://i01.appmifile.com/webfile/globalweb/drivers/Xiaomi_Photo
_Printer_1S.zip” to download the driver.
Press and hold the direct connection buon for 3 seconds. When the
direct connection indicator blinks orange, the printer is awaiting
connection.
Enable the wireless network of the device, and select "Xiaomi Photo
Printer 1S [XXXX]". Check the printer's hotspot password on the
barcode label at the boom of the printer, and enter the password
to connect the printer to the device. Aer the device is successfully
connected to the printer, the direct connection indicator will remain
blue.
4
Adding a printer
Open the photo file you want to print with image editing soware.
Click Print, and select the printer named "Xiaomi Instant Photo Printer
1S [XXXX]" to print.
Follow the same paths described in the Wireless Printing via PC.
8