What to do if my Xiaomi 70mai doesn't work?
First, ensure the adapter is securely plugged into the cigarette lighter receptacle and the USB cable is properly connected. Verify that your car's engine is running and the cigarette lighter receptacle is providing power. If the camera still doesn't work, use a pin to press the Reset button located on the bottom to restart it.
What to do if my Xiaomi Dash Cameras stops recording unexpectedly?
If your Xiaomi Dash Cameras unexpectedly stops recording, try reformatting your card. If the issue persists, replace the card.
How to fix incorrect system time on Xiaomi 70mai Dash Cameras?
To correct the system time, connect your phone to the device and adjust the system time using the 70mai dash cam app.
What to do if my Xiaomi 70mai device doesn’t respond?
If your dash cam is unresponsive, try pressing the Reset button with a pin. Alternatively, press and hold the Power button to switch off the dash cam, then turn it back on.
Why does my Xiaomi 70mai Dash Cameras reboot after being powered on?
Ensure you are using the original accessories provided with the dash cam. Try unplugging the adapter and then plugging it back in.
What to do if my Xiaomi 70mai videos aren’t clear?
Ensure that your windshield is clean and that nothing is obstructing the dash cam's lens.
What to do if my Xiaomi 70mai Dash Cameras doesn't start recording after being powered on?
When using the dash cam for the first time, you need to activate it via the 70mai dash cam app. The device won't record videos if it hasn't been activated. If the device is already activated but not recording, verify that your TF card meets the device requirements and is formatted by the device before use.
Why does the electrostatic sticker on my Xiaomi 70mai Dash Cameras fall down?
Ensure your windshield is clean, then attach the electrostatic sticker to the glass, making sure to remove any air bubbles between the sticker and the windshield.
What to do if my Xiaomi Dash Cameras authorization failed?
To protect your data, when adding a new dash cam to your app, you'll be prompted to press the power key to accept the connection request from your phone. If you've already added the dash cam but receive an 'Authorization failed' notification, remove the dash cam from the 'My device' list and then add it again.
What to do if my Xiaomi 70mai video files were corrupted?
If your video files are corrupted, replace the TF card.
General| GPS | Yes |
|---|---|
| G-Sensor | Yes |
| Model | 70mai |
| Display | 2.0-inch |
| Storage | MicroSD card |
| Features | Loop recording, Parking mode |
| Battery | Built-in lithium-ion battery |
To Next Page
