Quick Release
Caution: To reduce the risk of the monitor from
accidentally falling down, please make sure the
stand is firmly installed in place.
4. Install the stand onto the mounting point until
it clicks into place. Try to shake the stand to
make sure it is securely installed.
Note: Press the quick release button to remove
the stand.
Do not remove the
monitor from the
protective foam during assembly.
1. Unpack the box, then remove the monitor
with its protective foam together from the box
and place them on a flat stable surface.
2. Install the stand onto the base and fasten it
with the thumb screw from the bottom of the
base.
How to Install
To Next Page
Loading...
Need help?
General
