Xiaomi CW700S - Page 7

Reseing
Precautions
When switching the network or the Xiaomi Account to which the camera is connected, please delete the camera
from the Xiaomi Home app and then bind it again.
Note: Reseing the camera will not delete any data on the microSD card.
The operating temperature for the camera ranges from -30°C to 60°C. Do not use the camera in environments with
temperatures above or below the specified range.
The camera is a precision electronic product that has an IP66 dust-tight and water-resistant rating. To ensure
normal use, do not use the camera in extremely humid environments or locations that may cause water ingress.
The power adapter that comes along with the camera is not waterproof and is only for indoor use. Do not use the
power adapter in extremely humid environments or locations that may cause water ingress. The operating
temperature for the power adapter ranges from -30°C to 45°C. Do not use in environments with temperatures
above or below the specified range.
To improve the camera's performance, do not place it where its lens faces or is next to a reflective surface, such as
glass and white walls, as this will cause the image to appear overly bright in areas close to the camera and darker
in areas further away, or may cause the camera to produce white images.
When using Wi-Fi, please make sure that the camera is installed in an area with a strong Wi-Fi signal. Do not install
the camera near microwave ovens or other objects or places that may affect its Wi-Fi signal.
When the night vision feature is enabled, the change of ambient light will trigger the filter to change, probably
accompanied by a slight click sound, which is normal.
If the power cable is damaged or broken, it must be replaced by professionals from the manufacturer, aer-sales
service department, or departments of similar functions to avoid safety hazards.
6
●