Xiaomi E5 - Before Use; Setup and Charging

07
Before Use
CAUTIONS:
• Do not place the charging dock in an area with direct sunlight.
• Please ensure that no items are placed within 0.5 m on the left and right sides and
within 1.5 m in front of the charging dock.
• It is recommended to fully charge the robot vacuum before using it for the first time to
maintain its optimal battery performance and maximize battery life.
• The robot vacuum will turn on automatically when it is on the charging dock, and
cannot be turned off while charging.
Charging
Remove the protective film from the charging dock. Place the charging dock against
a wall and connect it to the power. Then place the robot vacuum onto the charging
dock to charge.
Protective Strip Protective Strip
Removal and Installation
Please remove the protective strips from both sides of the robot vacuum.
Connecting with Mi Home/
Xiaomi Home App
This product works with the Mi Home/Xiaomi Home a
pp*. Use the Mi Home/
Xiaomi Home app to control your device, and to interact with other smart
home devices.
Scan the QR code to download and install the
app. You will be directed to the connection
setup page if the app is installed already. Or
search "Mi Home/Xiaomi Home" in the app
store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then
follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name
of the app displayed on your device should be taken as the default.
Note:
• The version of the app might have been updated, please follow the instructions based
on the current app version.
for seven
Resetting Wi-Fi
While the robot vacuum is turned on, press and hold the buttons and
seconds. The Wi-Fi is successfully reset when you hear a voice prompt.
Resetting System
0.5 m
0.5 m
1.5 m
D515505B
Press and hold the button for 7 seconds until you hear a beep. Then press and hold
the same button for 7 seconds until you hear three beeps, and the robot vacuum
restarts. Simultaneously, settings such as network connection and scheduled cleanup
are cleared up.