EasyManuals Logo

Xiaomi G20 Lite User Manual

Xiaomi G20 Lite
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Common Issue
Troubleshooting
Common Issue
Possible Cause
Solution
The vacuum
cleaner does not
work.
The suction power
reduces.
Low battery life.
The roller brush
does not rotate.
Unable to charge.
The battery charges
slowly.
Battery is depleted.
Charge the vacuum cleaner before use.
The suction opening, air
duct, pre-filter, or post-
filter is blocked.
The filter, pre-filter, or
post-filter is not
installed in place.
Check and clean immediately.
Check and install in place.
The battery temperature
protection is triggered.
The dust compartment is fulll,
or the pre-filter or the post-filter
or the post-filter is blocked.
Wait until the battery temperature
returns to normal, then resume use.
Check and clean immediately.
Brush head is clogged. Clean the brush head.
Battery is not fully
charged.
Charge the vacuum cleaner before use.
The dust compartment is
full, or the pre-filter or the
post-filter is blocked.
Check and clean immediately.
Brush head is clogged. Clean the brush head.
The roller brush is stuck
by foreign objects.
The high-temperature
protection for the brush
bar's motor is triggered.
Remove any foreign object,
and then resume use.
Wait for the temperature of the brush
bar's motor to return to normal before
use.
The conductive contacts
are dirty.
Wipe the contacts with a soft
dry cloth andy try again.
The power supply being
used is not genuine.
The battery temperature
protection is triggered.
Only use the genuine power supply
to charge the vacuum cleaner.
Wait until the battery temperature
returns to normal, then resume use.
Note: If the solutions above do not resolve the issue, please contact the after-sales service team.
If the vacuum cleaner is not working properly, the battery level indicator will display an error
message. Refer to the table below for troubleshooting.
Error message
Possible Cause
Solution
LED 1, LED 2
and LED 3 blink
three times
simultaneously.
Power supply error
The battery temperature
protection is triggered.
Battery cell error
Temperature sensor error
Motor error
Battery Depleted
LED 1 blinks ten times.
Only use the genuine power
supply to charge the vacuum
cleaner.
Wait for the temperature
of the brush bar's motor
to return to normal before
use.
Contact the after-sales
service team
Only use the genuine power
supply to charge the vacuum
cleaner.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xiaomi G20 Lite and is the answer not in the manual?

Xiaomi G20 Lite Specifications

General IconGeneral
BrandXiaomi
ModelG20 Lite
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals