Xiaomi Redmi AirDots Pairing Guide

First pairing steps
Step 1: Take out the two headphones from the battery box will power on automatically.
Step 2: Refresh the Bluetooth device of the mobile phone, pairing the “Redmi
AirDots_R”. The left ear does not need to be matched separately. It can be connected
automatically.
Note:
●If you put the headphones back into the charging box and red light will be turned on,
the Redmi Airdots will automatically disconnect.
●If you take out the headphones and the white light turned on, the Airdots automatically
connect back.
How to reset Redmi AirDots?
Step 1:Press the multi-function key for 15 seconds until the red and white light flashes
alternately three times and off, the device reset successful.

Xiaomi Redmi AirDots Specifications

General

Bluetooth Version	5.0
Charging Time	1.5 hours
Water Resistance	IPX4
Type	In-ear
Connectivity	Wireless
Bluetooth profiles	HFP/A2DP/HSP/AVRCP
Wireless range	10 meters
Talk time	4 hours
Standby time	150 hours
Battery capacity	40 mAh (each earbud), 300 mAh (charging case)
Frequency Response	20 Hz - 20 kHz
Impedance	32 ohms
Battery Life	4 hours (earbuds), 12 hours (with charging case)
Weight	4.1 g (each earbud)
Driver Unit	7.2 mm dynamic