Connecting with the Mi Home/Xiaomi Home App
Restoring Factory Settings
This product works with the Mi Home/Xiaomi Home app*. Control
your device with Mi Home/Xiaomi Home app.
Note: The version of the app might have been updated, please follow
the instructions based on the current app version. Make sure the
camera turns on and the network connection is stable during
connecting. The indicator is blinking orange rapidly when waiting for a
connection, and turns into blue once the camera is successfully
connected.
In case the network the camera is connected to, or the Xiaomi
Account the camera is paired with has to be changed, use a pin to
press and hold the reset button for about five seconds to restore
factory settings. Then reconnect the network and the Mi Home/Xiaomi
Home app with the camera.
Note: Restoring factory settings will not delete the content on the
microSD card.
Scan the QR code to download and install the app.
You will be directed to the connection setup page
if the app is installed already. Or search for
"Mi Home/Xiaomi Home" in the app store to
download and install it.
Open the Mi Home/Xiaomi Home app, tap "+" on
the upper right, and then follow the instructions
to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for
Russia). The name of the app displayed on your device should be
taken as the default.
5
2CCD476E
To Next Page
Loading...
Need help?
General
Weight and Dimensions
