The amount of water should not exceed the maximum water level mark or be below the minimum water level mark.
2. Fully close the lid, and place the kettle on the base.
If the contact is good, the indicator blinks once and then turns of
Keep Warm after Boiling-up
Notes:
The function of “automatically keep warm after boiling” is disabled by default. It is recommended to enable it in the app
for a better user experience.
When the water is boiling up, the temperature displayed may differ from the actual water temperature due to regional
differences in altitude.
1. Press the boil button, the boil indicator will turn red. The kettle starts heating up, and the real-time temperature will be
displayed.
2. If the function of “automatically keep warm after boiling” is not enabled, the boil indicator turns off once the water is
To Next Page
Loading...
