4. Press the keep warm button again to cancel it. The keep warm indicator will turn off and the kettle will enter standby
mode.
Note: When the water temperature drops below 45°C in standby mode, the display will turn off after 2 minutes of
inactivity. Press any button to wake up the kettle when the display is turned off.
Keep Warm after Lifting Kettle
When you lift the kettle and then place it back onto the base, the kettle can continue to work for keeping warm. The indicator
blinks 3 times and the kettle resumes keeping warm to the set temperature. To use this function, it requires you set a
temperature first and then enable “Remember keep warm temperature after lifting kettle” in the app.
Notes:
The function of “Remember keep warm temperature after lifting kettle” is disabled by default. It is recommended to
enable it in the app for a better user experience.
When the function of “Remember keep warm temperature after lifting kettle” is enabled, make sure the water level in the
kettle is above the minimum water level mark. Otherwise, there may be a risk of boil-dry.
When placing the kettle back onto the base, ensure that the difference between the temperature of the water in the kettle
and the set one is within 10 degrees.
The function of “Remember keep warm temperature after lifting kettle” will be disabled when adding cold water. Press
the keep warm button to enable this function.
To Next Page
Loading...
