When the smart kettle is working, pressing the boil button will make it enter the standby mode.
Simultaneously press and hold “Boil” and “Warm” buttons for 3 seconds to restore factory settings.
Connect with Mi Home/ Xiaomi Home App
This product works with Mi Home/Xiaomi Home app*. Control your device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed
already. Or search “Mi Home/Xiaomi Home” in the app Store to download and install it.
Open Mi Home/Xiaomi Home app, tap “+” on the upper right, and then follow prompts to add your device.
The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your
device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
Disable the Bluetooth function: Press and hold the boil button for 10 seconds.
Enable the Bluetooth function: Press and hold the boil button for 3 seconds.
If the smart kettle cannot be found when connecting to the app, it is recommended to disable and enable its Bluetooth
function, and then try to connect again.
Cleaning & Maintenance
1. Soak with white vinegar.
Pour in 0.5 L of food-grade white vinegar and leave to soak for at least 1 hour.
2. Pour out the white vinegar.
After pouring out the white vinegar, wipe out any remaining sediment with a damp cloth.
3. Boil water to clean out the kettle.
Pour out the hot water after it boils, and then use clean water to rinse the kettle 4–5 times.
4. Wipe it dry and put it away.
Use a dry cloth to clean the outside of the kettle. Keep the kettle in a dry, well-ventilated area, and protect it from dust,
moisture, and insects.
Precautions:
Make sure the kettle is unplugged and let it cool down before cleaning.
Regular cleaning and removal of sediment from the kettle will help extend its service life.
If there is serious limescale buildup, please repeat the steps above. Do not use steel wool or any chemical or abrasive
cleaning agents.
Do not immerse the kettle or the base in water, and keep its exterior dry
Electrical Diagram
To Next Page
Loading...