Need help?Do you have a question about the XIEGU X6200 and is the answer not in the manual?
General| RF Power Output | 20W |
|---|---|
| Operating Modes | SSB, CW, AM, FM |
| Supply Voltage | 12V |
| Tuning Steps | 10 Hz |
| Interface | USB, ACC |
| Built-in Features | Automatic Antenna Tuner |
Detailed steps for starting and powering down the transceiver, including important attention points.
Essential safety guidelines for using the device, covering electrical, environmental, and operational hazards.
Legal operating requirements and essential guidelines for lithium-ion battery usage and maintenance.
Information on potential interference from wireless devices and strategies for mitigation.
Detailed description of the front panel controls, indicators, and display elements.
Identification and function of ports and buttons on the sides, top, and hand microphone.
Instructions for connecting external power, wiring, and charging the internal battery.
Using the MFK knob for adjustments and understanding the main interface display areas.
Procedure for starting up, shutting down, and adjusting audio volume levels.
Selecting bands/modes, setting frequencies, and adjusting RF gain and squelch.
Using transmission modes, the PTT key, and the automatic antenna tuner.
How to lock and unlock the transceiver's keys and main knob to prevent accidental changes.
Basic menu navigation, accessing GEN settings for pre-amplification, gain, and power.
Managing system settings, memory channels, and application features (Modem, FT8, etc.).
Operating Modem, SWR Scan, FT8 Decode, Voice Call, Keypad, Messages, and Digital Filters.
Configuring wireless network, Bluetooth, time, firmware, and factory reset.
Steps for performing a forced shutdown in case of system malfunction.
Connecting external amplifiers, computers for data, and WFSERVER for remote control.
Detailed technical specifications including frequency ranges, power, sensitivity, and dimensions.
Contents of the product package and relevant declarations of conformity.
To Next Page
