XIEGU G1M - User Manual

G-CORE
V3 Manual
XIEGU
G1M
HF Four Band Portable SDR Transceiver
Kit
Operation Manual

Summary

Front Panel Description

Front Panel Controls and Interfaces

Details of power switch, volume control, MIC interface, multi-function buttons, lock button, display screen, and frequency knob.

Rear Panel Connectors

Rear Panel Interface Descriptions

Details of Antenna, ACC, COMM, KEY, SPK, and DC IN interfaces, along with grounding screw nut.

External Power Connection

DC Power Supply Requirements

Specifies 13.8V DC power supply with at least 3A capacity and correct polarity connection.

Ferrite Choke Installation

Instructions for using a snap-on ferrite choke to prevent interference from the power line.

Operation and Settings

Multi-function Menu Operation

Explains how to navigate and use the multi-function menu with tuning knob and buttons.

Menu Mode and Button Functions

Details menu page switching, button modes (light press, hold press), and feature mapping.

LCD Display Information

Describes the OLED display's status information, including working frequency and modes.

Computer Connectivity and Control

Connection to Computer

Steps for connecting the G1M to a computer for third-party software control.

Computer Control Instructions

Information on using the standard CIV instruction set for remote transceiver control.

Band Voltage Data

ACC Port Band Data

Details band data voltage output from the ACC port for peripheral device control.

Specifications and Packing

Technical Specifications

Lists receiving/transmitting frequencies, operating modes, sensitivity, power, and stability.

Box Packing List

Enumerate items included in the package: G1M unit, mic, power cable, manual, certificate, warranty card.

XIEGU G1M Specifications