1
A User's Guide for the X1M PRO Transceiver
Frederick A. Lesnick, VE3FAL
Paul W. Ross, W3FIS
Charles O. Vest, W5COV
Revision 3.1.4 – 12/19/13
This guide is for the X1M HF PRO (Platinum) model QRP transceiver, manufactured by Chonqinq
Xiegu Technology Co., Ltd. of China.
Technical Specifications
The published specifications for the radio are as follows:
Receive: 0.1 - 30MHz continuous.
Transmit: Band 1 3.5 – 4.0 MHz (80 Meters)
Band 2 7.0 – 7.3 MHz (40 Meters)
Band 3 14.0 – 14.35 MHz (20 Meters)
Band 4 21.0 – 21.45 MHz (15 Meters)
Band 5 28.0 – 29.7 MHz (10 Meters)
The full range of transmission from 0.1 to 30 MHz is available with suitable external
bandpass filters. Otherwise, transmission is limited to the listed amateur bands via
internal programming.
Operating modes: USB, LSB, and CW.
Receiver sensitivity: better than 0.45 μVolts.
RF power output: 4.5 Watts.
Frequency stability: better than 0.5 parts per million.
Memory storage locations: 32 pairs of VFO settings (both VFOa and VFOb)
Operating voltage: 9.6 – 14.5 Volts DC
To Next Page
Need help?
General
