XIEGU X108G User Manual (English)

Other manuals for XIEGU X108G

Service Manual36 pages

Operating Instructions15 pages

Questions and Answers:

L
Lisa HuertaJul 27, 2025
Why is my XIEGU X108G not transmitting?
- B
  Brittany PriceJul 27, 2025
  There could be several reasons why your XIEGU Transceiver is not transmitting: * The antenna might not be properly connected; ensure it is securely connected. * The power supply voltage may be too low; consider replacing the power supply. * There might be a lack of power; replace the power supply. * The antenna SWR value might be too large; check the antenna. * The work mode might not be correct; choose the right mode of work. * If none of these solve the issue, the device may need repair.
J
jason20Aug 2, 2025
What to do if my XIEGU X108G Transceiver is unable to turn on?
- D
  Danielle WagnerAug 2, 2025
  If your XIEGU X108G Transceiver is unable to turn on, consider the following: * Ensure the power cable is properly connected. * Verify that the power is turned on. * Check the power cable connection; replace or repair if bad. * Confirm the power supply is properly connected, not reversed.
T
travis83Aug 8, 2025
What to do if my XIEGU X108G Transceiver is not receiving?
- A
  Amanda WattsAug 8, 2025
  If your XIEGU Transceiver is not receiving, check the following: * Ensure the antenna is properly connected. * The antenna may be faulty; replace or repair the antenna. * Confirm the propagation characteristics of the current wave. * If none of these steps work, the device may need repair.
R
Rachel OrtizAug 13, 2025
Why is my XIEGU Transceiver screen showing no display?
- J
  Jonathan BrownAug 14, 2025
  If your XIEGU Transceiver screen shows no display, the possible causes are: * The power cord might not be connected, ensure it is properly connected. * The power might not be turned on, make sure to turn it on. * If the above steps do not resolve the issue, the device may need repair.
V
Vanessa GomezAug 20, 2025
Why is my XIEGU X108G Transceiver microphone operation an exception?
- J
  Jeremy GibsonAug 20, 2025
  If you are experiencing a microphone operation exception with your XIEGU Transceiver, consider the following: * Check the PTT interface connection; try reconnecting the microphone. * Confirm that the current frequency is not in the forbidden band; reset the frequency. * If the button has no reaction, try reconnecting the microphone. * If the issue persists, the device may need repair.

XIEGU X108G Specifications

General

Display	LCD
Modes	SSB, CW, AM, FM
Tuning Steps	10Hz
Power Supply	13.8V DC
Operating Modes	Half-duplex
Mode	SSB, CW, AM, FM
Receiver Sensitivity	0.5 µV
Interface	USB

Summary

Important Reminder and Safety

Security Considerations

Essential safety guidelines for operating the transceiver, covering environmental and operational risks.

Product Features and Packing List

Product Features

Key technical specifications and capabilities of the HF transceiver, including sensitivity and filters.

Packing List

Details the items included in the product package with their quantities.

Specifications Overview

Basic Specifications

Fundamental operational parameters including frequency range, impedance, and voltage.

Transmitter Details

Information on transmitter power, modulation modes, spurious response, and IF filters.

Receiving Performance

Details on receiver sensitivity, IF frequency, and supported receive frequency bands.

Equipment Description

Front Panel Layout

Identifies and explains the controls, ports, and displays on the front of the transceiver.

Rear Panel Connections

Details the various interfaces and ports located on the rear of the transceiver.

Microphone and Display Details

Microphone Functions

Details the buttons and their operations on the handheld microphone accessory.

Display Information

Describes the meaning of various indicators and data shown on the transceiver's screen.

Operating Instructions

Screen Display Overview

Explains how to interpret the transceiver's screen and its indicators.

Key Operation Functions

Details basic functions like mode, AGC, NB, and VFO switching shown on the screen.

Operational Controls and Settings

Frequency and VFO Management

Covers VFO setup, split frequency operations, and RIT tuning for precise frequency control.

Power and Memory Functions

Explains transmit power adjustment, memory storage, and channel management.

Getting Started with X108G

Setting Operating Frequency

Guides on how to set the desired operating frequency using the main unit or microphone.

Mode and Filter Switching

Instructions for changing operating modes and selecting built-in filters.

Preamplifier Control

Details on how to turn the preamplifier on and off for optimal reception.

Advanced Operations

Gain, Blanker, and VFO Switching

Explains Automatic Gain Control, Noise Blanker, and switching between VFOs.

Split Frequency and RIT Tuning

Details split frequency operations and the Receiver Incremental Tuning feature.

Transmit Power and Mode Switching

Guides on adjusting transmit power and switching between frequency and channel modes.

Memory Management and System Settings

Memory, Keying, and Time

Instructions for saving settings to memory, using telegraph keys, and setting local time.

Squelch, Compression, and Software

Details setting squelch level, voice compression, and connecting with HRD software.

Extended Interface Ports

Audio and Keyer Interfaces

Details the AUX, SPK, and KEYER ports and their functions.

ACC and USB/DC IN Ports

Explains the ACC port pin definitions and the USB/DC IN power connections.

Advanced Menu Settings

System Settings Configuration

Guides on accessing and modifying system settings like IF, BFO, and DDSCLK.

Custom Display and Check Value

Instructions for defining call sign display and accessing ADC system check values.

General Troubleshooting

Power and Reception Issues

Troubleshooting steps for problems like unable to turn on, not receiving, or screen display issues.

Transmission and Microphone Problems

Resolving issues related to not transmitting, incorrect SWR, and microphone interface exceptions.

After Sales Service Policy

Warranty Clause

Details the warranty terms, conditions, and period for product defects and replacements.

Warranty Limitations

Outlines circumstances under which the warranty will be cancelled or does not apply.

Related product manuals

XIEGU X108G User Manual

Table of Contents