XIEGU X108G - Getting Started with X108 G; Setting Operating Frequency; Mode and Filter Switching; Preamplifier Control

7
【SQL】 Select to adjust Squelch level via selector Main function knob, level shown on line display
in screen
【CMP】voice compression settings.
3.2 Start using your X108G
3.2.1 Set the current operating frequency
Method 1: Press the function button(TS+/TS-), move the frequency step to the required numerical
digit of adjustments, then rotate the main function knob, Changing the current frequency
Method 2: On the microphone, press the function button
then input frequency directly, e.g. 14.27, then press the function button F-INPENT again, complete
the setting.
3.2.2: Mode Switching
Method 1: Press the frequency knob to switch the current menu page, then press [MODE].Press
corresponding multifunction button, to complete mode switching.
Method 2: On the multifunction digital microphone in hand, press
to complete the mode switching.
3.2.3: Filter Switching
Method 1: Press the frequency knob to switch the current menu page, then press [FIL].
Press corresponding multifunction button to complete filter switching.
Method 2: On the multifunction digital microphone in hand, press
to complete filter switching.
3.2.4: Preamplifier on/off
Press the frequency knob to switch the current menu page, then press [PRE].
When the preamplifier is on, PRE will be highlighted. Press this button again to close the
preamplifier. When the preamplifier is off, PRE will appear dark.