Copyright © 2010~2017, Xiegu Communications
Before disassembling, make sure that the problem comes from inside the
Be sure to completely cut off the external power before opening case.
Do not forcibly remove any parts to avoid any damage.
Please use insulated screwdriver to adjust the circuit to avoid short circuit.
Do not turn on the radio for a long time if there is any fault.
Do not connect the transmit port directly to the test ports of signal generator
Do not keep transmitting in open circuit status for repairing.
Read the manual carefully before doing any test.
All manuals and user guides at all-guides.com
all-guides.com
To Next Page
Need help?
General
