XIEGU X108G - Advanced Menu Settings; System Settings Configuration

4： ALC voltage output
5： External Audio input
6： Ground
Bandvoltage parameter
【USB】USB port
PC control or firmware update
【DC IN】 Power port
Power socket polarity, as shown:
Note：Power input range:
12~14.5V DC
Do not exceed the input voltage range and Reverse
【Ground hole】
【Ground screw】
3.4.Advanced Menu Settings
CAUTION: THESE SETTINGS ARE
DIRECTLY RELATED TO THE CORRECTOPERATION OF THIS RADIO.
PLEASE EXERCISE CAUTION. PLEASE RECORD AND SAVE ALL ORIGINAL FACTORY SETTINGS BEFORE MAKING ANY
ADJUSTMENTS.
3.4.1
In the shutdown state, press and hold the F1 key on the host and turn on (note, do
until the screen displays the data of the engineering menu, as shown below
11
12~14.5V DC
Do not exceed the input voltage range and Reverse
polarity.
DIRECTLY RELATED TO THE CORRECTOPERATION OF THIS RADIO.
PLEASE EXERCISE CAUTION. PLEASE RECORD AND SAVE ALL ORIGINAL FACTORY SETTINGS BEFORE MAKING ANY
In the shutdown state, press and hold the F1 key on the host and turn on (note, do
until the screen displays the data of the engineering menu, as shown below
DIRECTLY RELATED TO THE CORRECTOPERATION OF THIS RADIO.
PLEASE EXERCISE CAUTION. PLEASE RECORD AND SAVE ALL ORIGINAL FACTORY SETTINGS BEFORE MAKING ANY
In the shutdown state, press and hold the F1 key on the host and turn on (note, do
not release)
until the screen displays the data of the engineering menu, as shown below
: