XIEGU X108G - Operational Controls and Settings; Frequency and VFO Management; Power and Memory Functions

6
【A=B】 Set VFO A the same as VFO B.
【SPLT】 Select SPLIT operating mode on or off.
【RIT】 Select RIT mode-adjust via selector Main function knob, setting shown on RIT display in
screen
【POW】 Set RF output power-adjust via selector Main function knob, level displayed via red in
screen
【V/M】 Select VFO or Memory mode. Select channel/frequency using selector frequency knob
【M>V】In memory mode, move current frequency to VFO and switch to VFO mode
【MW】In VFO mode, store current frequency and settings in memory
【MC】In memory mode, clear selected memory channel
【FIL】Select filter
【KEY】 Select keyer - Manual/Auto L/Auto R
【KSPD】Select keying speed – adjust via selector Main function knob, speed displayed under KEY in
screen
【TIME】Set internal Clock – adjust via selector Main function knob, select hour/minute with
Up/Down buttons