9
plate, decals, tags and operation and maintenance handbooks.
- Only in the event that the truck manufacturer is no longer in business and there is no successor
in the interest to the business, the user may arrange for a modification or alteration to a
powered industrial truck, provided, however, that the user shall:
a) arrange for the modification or alteration to be designed, tested and implemented by an
engineer(s) expert in industrial trucks and their safety;
b) maintain a permanent record of the design, test(s) and implementation of the modification
or alteration;
c) approve and make appropriate changes to the capacity plate(s), decals, tags and instruction
handbook;
d) affix a permanent and readily visible label to the truck stating the manner in which the truck
has been modified or altered together with the date of the modification or alteration, and the
name and address of the organisation that accomplished the tasks.
⑹ Prepare safety operation procedure:
Safety operation procedure shall be formulated with consideration of practical situations
before operation of the truck. Safety shall be taken into full consideration in preparation of the
safety operation procedure.
⑺ Operation of truck under unsafe condition is strictly forbidden:
a. Operation under unsafe condition is forbidden, such as under conditions with uneven floor, or
impeded road. Goods lifting on slope is strictly forbidden.
b. Faulty truck is forbidden to use.
c. Make sure a daily inspection of the truck would be taken. Please immediately repair or
replace in case of any abnormal conditions.
⑻ Overloading operation of truck is forbidden:
W
arning
Overloading operation of truck is forbidden. Overloading operation would
cause damage to the truck or bring harm to operator.
⑼ Use suitable pallet:
The pallet shall be of suitable dimensions, neither too wide nor too large.
⑽ Electrical system check:
Notice
Before checking the electrical system, turn off the key switches and the
emergency isolation switches.
3．2 Safety Operation Specification:
⑴ Check the safety condition around the truck:
Notice
Before starting up the truck, please ensure that there is no person around it.
To Next Page
