Xilinx Alveo U50 Installation Guide

When the Alveo card is successfully ashed and cold rebooted, the xbmgmt flash --scan
output will show the same package informaon for both Flashable partition running
on FPGA and Flashable partitions installed in system.
If you have mulple cards installed on the server, you must run the xbmgmt flash command
separately for each card.
IMPORTANT! Use a separate xbmgmt flash command to ash each card in the system.
IMPORTANT! Ulisez une commande xbmgmt ash disncte pour faire asher chaque carte du système.
WICHTIG! Verwenden Sie einen separaten xbmgmt ash-Befehl, um jede Karte im System zu ashen.
Appendix D: Generating the xbmgmt flash --update Command
UG1370 (v1.7) December 9, 2020 www.xilinx.com
Alveo U50 Data Center Accelerator Card Installation Guide 42
Send Feedback

Xilinx Alveo U50 Specifications

General

Brand	Xilinx
Model	Alveo U50
Category	Computer Hardware
Language	English