22
RUN
When it is ON , it indicates the inverter is in rotation status ;
When it is OFF , it indicates the inverter is in stop status .
LOCAL/REMOT When it is OFF , it indicates the keyboard operation control status ;
When it is ON , it indicates the terminal operation control status ;
When it flashes , it indicates the communication control status ;
When it is OFF , it indicates the inverer is in forward rotation status ;
When it is ON , it indicates the inverter is in reverse rotation status .
FWD/REV
Hz
A
Hz
A
3、
The digital LED of above displays function code , parameter numerical value , status parameter and so on .
The digital LED of underside displays FV parameter that it is setted by F6.05 .
V
Frequency unit
Voltage unit
Current unit
4.1 Introduction to operation and display interface
1 Description of function LED indictor :、
2、Unit indictor description
Digital display zone :
Chapter 4 Operation and Display
Chapter 4 Operation and Display
The operation panel can perform such operations on the inverter as function parameter modification ,
inverter working status monitoring and inverter runnign control (startup and stop) .Refer to Fig.4-1
for the physical appearance and functional zone of the operation panel .
:
Optional purchse part
Fig.4-1 Operation Panel Diagram
Stop
Stop
Unit indicator
Unit
indicator
Function
indicator
Function
indicator
Potentiometer
Potentiometer
Shift
Shift
S
S
Digital
display
Digital
display
Program
Program
Exit
Exit
Data confirm
Data confirm
Enter
Enter
Run
Run
Digital modification
Digital modification
Reset
Reset
To Next Page
Loading...