DP-7022P Users Manual
7
However, when the power supply voltage is large, the vibration is large at low-speed;
if set current is large, the driver and motor heat is very serious.
For actual applications, users can select suitable current to achieve well effect.
3-3. Mode setting
The driver set the subdivision and current by parameters through panel. For more
details, please refer to chapter 4-2.
3-3-1. Current setting
Parameter P0.00 can set any current level in the range of 0~7.0A. Parameter
P0.01can set the half current and full current state.
3-3-2. Subdivision setting
Parameter P0.02 can set the subdivision resolution. For more details, please refer
to chapter 4-2.
To Next Page
Loading...