Xinje TH765-M - Page 50

TH series Touchscreen User Manual Page 50 of 81 MANUL018R2V1
The touch area adjustment function can make the component touch more precise.
The adjustment steps:
Step 1:
Turn on the DIP switch 3, then power on the TH again, it will show the following screen:
Step2:
After clicking the cross centre, the adjust cross will jump to the second position. Keep on click the
cross until the cross jump to the last position 5.
Calibrate the touch panel
Repeat as the target moves around the screen
Adjust cross
7-1 Adjust the touch screen
Calibrate the touch panel
Repeat as the target moves around the screen
1
2
3
4
5
OFF
ON
2
1
3 4
Turn on switch 3
Click the centre of the adjust cross