TH series Touchscreen User Manual Page 51 of 81 MANUL018R2V1
Step 3:
Please see the detailed motion:
Step 4:
When finished the adjustment, the result is as the following;
Note:
If the adjustment process is end, please turn off the power of TH, then turn off the DIP switch 3, then
turn on the power again. Now you can use TH normally.
Adjustment process is failed. Please do
again.
Calibrate the touch panel
Repeat as the target moves around the screen
Calibrate the touch panel
Repeat as the target moves around the screen
Calibrate the touch panel
Repeat as the target moves around the screen
Calibrate the touch panel
Repeat as the target moves around the screen
Calibrate the touch panel
Repeat as the target moves around the screen
1. Click the centre of the cross
2. Click the centre of the cross on
the top left
3. Click the centre of the cross on
the left bottom
4. Click the centre of the cross on
the right bottom
5. Click the centre of the cross on
the top right to finish the adjust
process.
Adjustment process is end.
Repeat as the target moves around the screen
Calibrate the touch panel
Repeat as the target moves around the screen
Calibrate the touch panel
To Next Page
Loading...