Xinje TH765-M - Page 60

TH series Touchscreen User Manual Page 60 of 81 MANUL018R2V1
Process:
4. Control tab
This tab is used to control the export.
Execute status: To show if it is in exporting state via bit state. If the bit is ON, TH is exporting data.
Execute result: Show the export result state via the register state.
 export failed
 export target device does not exist
 the memory is not enough
 file path error
 reading / writing file failed
Execute process: Show the exporting process via register, 100 means the exporting process is
succeed.
5. Date time
EXAMPLE:
This chapter will introduce the data export examples in loop and line mode.
<A> Data export in loop mode
Purpose: collect the data via history data map, export the data to moveable device and save as CSV
file.
Please see the whole process:
To add the date in the CSV file.
Please select the data format and time
format in the pull down menu.
Produce
data source
Data
collection
Data
export
Export
the
data
Collect
data by
history
data
map
PSW300
value increase
10 every 1
second, use
function field
to realize it.
Save the
data in the
registers
start from
PSW400
Produce
CSV file
Collect object
is PSW300