Xinje TH765-M - Page 65

TH series Touchscreen User Manual Page 65 of 81 MANUL018R2V1
Save tab
Date time tab
Now the data export has been done.
Via the simulate offline, you can monitor
the data change and operate the button.
The operation steps:
Step 1: Make sure the TH is connected to object device.
Step 2: Click ON/OFF button to start the data collection in history data map
Step 3: Click the data export button, the U disk device LED starts to flickering, it means the CSV file is
being produced, if the LED ends flicker, the export process has been finished.
The CSV data is shown as below:
Turn on the button
to start the history
data map
Click the button to
export the data into
U disk
Save the data in PSW400
Date time: export the date and time to the .csv
file.