Xinje TH765-M - Page 66

TH series Touchscreen User Manual Page 66 of 81 MANUL018R2V1
<B> Data export in line mode
In industry system, HMI is seemed as control and monitor terminal. It can be used to set all kinds of
parameters directly. In order to check the history data, use data export function to complete the data
management.
Example:
Using data export function to complete the parameters recording.
Purpose: realize parameters setting by data input button, and data export by data export button.
The process is shown as below:
Next, we will introduce how to make the project in two parts:
Part 1: Input the parameters
Put the data input button on the screen, change the address as the following:
PSW500 PSW501 PSW502 PSW503 PSW504
Note:
About the data input button, please refer to TP series HMI manual.
Part 2: about data export button
Click function button, then set as the following:
Realize by data input
button
Data input 4
Data input 5
Data input 1
PSW500
Data input 2
PSW501
Data input 3
PSW502
PSW503
PSW504
Data export
button
Save in CSV format file
Set the head address to
PSW500.
Realize by function
button/export CSV data