Xinje ZG3 Series - Relay Output Specifications

2-2. Relay output
 Output points
Relay output has 4 common points. Different units can drive the loader of different power-
voltage systems.
 Loop insulation
It is electric insulated between relay output point and outside load circuit.
 Action indication
Relay output coil produces close sound when it is on.
 Response time
The response time is about 10ms transferring the ON or OFF signal from relay output coil to
Power supply
Below AC250V, DC30V
Circuit insulation
Machinery insulation
Max loader
Resistance load
3A
Inductance load
80VA
Lamp load
100W
Min loader
DC5V 2mA
Response
time
OFF→ON
10ms
ON→OFF
10ms
Relay output spec
Relay output circuit