Xinje ZG3 Series - Page 72

SFD1387
High 16 bits of max speed
limiting
SFD1388
Low 16 bits of starting speed
SFD1389
High 16 bits of starting speed
SFD1390
Low 16 bits of ending speed
SFD1391
High 16 bits of ending speed
SFD1392
Curve acceleration time (ms)
…
SFD1400
Low 16 bits of pulse default
speed
Only when speed=0, default
speed is used to transmit pulse.
Forth set of
parameters
SFD1401
High 16 bits of pulse default
speed
SFD1402
Accelerating time of pulse
default speed
SFD1403
Decelerating time of pulse
default speed
SFD1404
Acc and Dec time of tween
SFD1405
Reserved
SFD1406
Low 16 bits of max speed
limiting
SFD1407
High 16 bits of max speed
limiting
SFD1408
Low 16 bits of starting speed
SFD1409
High 16 bits of starting speed
SFD1410
Low 16 bits of ending speed
SFD1411
High 16 bits of ending speed
SFD1412
Curve acceleration time (ms)
…
SFD1420
Pulse parameters setting
Bit 0：logic of pulse output
0：positive logic;
1：negative logic , default is 0
Bit 1：logic of pulse direction
0：positive logic;
1：negative logic , default is 0
Bit 8：pulse unit
0：pulse number;
1：pulse equivalent, default is 0
Public
parameters
PULS
E_5
SFD1421
SFD1422
Low 16 bits of pulse number per
circle
SFD1423
High 16 bits of pulse number per
circle