Page 22
gas requirements
CAUTION: When the appliance is not in use
the gas must be turned off at the tank. Place
dust cap on cylinder valve outlet whenever
the cylinder is not in use. Only install the type
of dust cap on the cylinder valve outlet that
is provided with the cylinder valve. Other
types of caps or plugs may result in leakage
of propane.
DISCONNECTING A LIQUID PROPANE
GAS (LPG) TANK FROM YOUR GRILL
1. Make sure the Burner Valves and LP
Gas tank valve are off. (Turn clockwise
to close.)
2. Detach the hose and regulator
assembly from the LP Gas tank valve
by turning the Quick Coupling Nut
counterclockwise.
3. Do not use a wrench or any tools when
turning the Quick Coupling Nut.
gas requirements and hook-up (cont'd.)
If you have a gas leak that cannot be repaired,
turn off the gas at the source and disconnect the
fuel line from your grill. Call your gas supplier or
fire department for repair assistance
WARNING
! !
1. Do not store spare LP cylinder within 10 feet
(3m) of this appliance.
2. Do not store or use gasoline or other
flammable liquids and vapors within 25 feet
(8m) of this appliance.
3. When cooking with oil/grease, do not allow
the oil/grease to get hotter 350°F (177°C).
4. Do not leave oil/grease unattended.
WARNING
! !
NATURAL GAS CONNECTION KIT INCLUDED WITH GAS GRILL
1.
2.
3. Always use plumbers putty or gas tape
on the male threads to seal the
connection.
4. and make
sure the "In" and "Out" are correct.
There is only one way the regulator
works.
5. A gas flex line or hose can then be
used to the house gas.
6. Test the connection with soupy water
and make sure there are no leaks.
To Next Page
Loading...
Need help?
General
