EasyManua.ls Logo

XP Aqua Ultimate ATO - LED Indicator

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Aquarium Experts
LED Indicator
LEDColor
Description Action
Status
Solid
Poweron N.A.
Circulating
Refilling/Pumping
N.A.
BlueLED
Pulsinglight
Detectiondelayof
safetysensors
N.A.
Alternating
&Blue
LEDOrange *
Flashingwith
shortbeeps
QSTalarm:
1.Bubble
interference
2.Emptyreservoir
1.Movetheupperblue
sensortoanareaaway
frommicrobubbles.
2.Refillthereservoir.
Flashingslowly
withshortbeeps
Non-fillingalarmof
Non-filling/RunDry
ProtectionSensor
1.Keepthebluesensor
clean.
2.CheckiftheATO
functionproperly.
*Pleasefollowtheinstructionabovetofixissuesandthenreset
(unplugthepowerandplugitbackin).
LEDOrange
1.Checkiftheupper
bluesensorfunction
properly.
2.Checktheset-upof
siphonbreakandtubes.
3.Takeouttheyellow
dualsensortocheckif
theyellowsensors
functionproperly.
Flashingquickly
withlongbeeps
Overfillalarmof
SecondaryOverfill
ProtectionSensor
Flashingquickly
withshortbeeps
Overfillalarmof
PrimaryOverfill
ProtectionSensor
Flashingwith
shortbeeps
Pumpconnection
failure
Checktheconnection
ofthepumpandthe
controller.

Related product manuals