XP Aqua Ultimate ATO - System Features and Specifications; Detection Delay of Safety Sensors; Touch Button Functionality; Quick Security Technology (QST)

Aquarium Experts
10
Allthesafetysensors(thelowerbluesensorsandtheupperyellowsensors)
havedetectiondelaysof3minutesaftertheATOsystemisplugged-in.Ifyou
wouldliketoskipthedelay,pressthecenterbuttononthecontrollertoallow
thesensorstodetectthewaterlevelimmediately.
UltimateATOusesQSTforreal-timeprotectionagainstanyfailuresituation.
Thecontrollerwillgiveanaudibleandvisualalertwhenitsensesanyother
refillingtimeis6timeslongerthanthefirstrefillingtime .Forexample,ifthe*
firstrefillingtimeis10sec,itwillalertwhenanyotherrefillingtimeisover
60sec.
*Nosecuritytimecontrolforthefirstrefilling.
Touchbutton:
1.Skipthe3-minutedetectiondelayofsafetysensors.
2.Switchoffthealarm.
*TouchthebuttonwillnotcleartheQSTmemory.
Pleaseunplugthepowerandplugitbackintoclear
theQSTmemory.
Detection Delay of Safety Sensors
Touch Button
Quick Security Technology (QST)
Specifications
1.PowerInput:100-240VAC50-60Hz
2.DCPump:
•Head:8.2ft(250cm)
•FlowRate:74gph(280lph)
3.MaxMountingThickness:1/2inch(12.7mm)
4.ACSwitch:
•Capacity:100-240VAC50-60Hz
•Max.Load:10A/1200W@120VAC;10A/2400W@240VAC
5.SolenoidValvePowerConsumption:6W@12VDC