25
Save a program with >
PROGRAM
>
S AV E
> .
The user program created will be placed just after its original factory program and will
bear its number followed by the symbol
.
On the main menu, select the user program that you want to delete with
or
;
then
>
PROGRAM
>
(3 seconds) >
DELETE
>
(3 seconds)
>
.
Save a program
PROGRAM
PROGRAM
PROGRAM
SAVE
DELETE
The 12 factory programs (1 to 12) can be modified to create 12 additional user programs.
All 12 factory programs will return to their original value every time the WS6 is turned off
and restarted.
Programs
Delete a program
OPTION / AUDIO & PROGRAMS
You can create only one user program for each factory program.
PWM
SQUARE
PWM is the traditional XP sound that you would have known on I or the wired range.
It is dynamic and informative through its wealth of harmonics that vary according to the amplitude of the
signal and therefore giving the operator a good indication of the depth or size of a target.
Square has fewer, softer and fixed harmonics, i.e. the harmonics do not vary according to the amplitude of
the signal, only its volume changes in relation to the deph or size of the target.
HIGH SQUARE
The High Square sound has a richer and clearer harmonic compared to the standard Square, especially
on deep or small targets which are higher and more identifiable. When combined with the Pitch tone, the
strong targets near the coil are lower and softened compared to the standard Square tone.
Audio Type...
AUDIO FIL.
Audio Filter
This function is to filter the audio and produce softer and more fluty sound, especially
when target is at the detection limit. At depth the signal will be less scratchy. In some
situations, Audio Filter can gain a little extra depth.
On the beach: high levels like 2 to 4 can be combined with a low reactivity (0 to 1).
In land: lower levels like 1 or 2 are suggested to help recognize the short iron blips.
At 0: The Audio Filter is deactivated.
0
To Next Page
Loading...
Need help?
General
