27
OPTION / PAIRING & SETTINGS
Ferrous T.ID
Language
This function turns on/off the visual target IDs for targets that fall below the discrimina-
tion setting, for example when FE TID is set OFF you only see the TIDs above the dis-
crimination adjustment even if you keep the Iron Volume ON.
Choose your language.
SETTINGS
FE. T.ID
LANGUAGE
GB
Adjust the main WS6 setting.
Press
choose
SETTINGS
then .
Settings
PAIRING
UNPAIR
Start XP wireless headphones
Press
>
PAIRING
, with or
choose the headphone, and select
START
,
Auto : XP wireless headphone paired to the WS6 master switch ON / OFF automatically.
Manual: XP wireless headphone paired to the WS6 master switch ON manually with
and switch OFF automatically
Press
then
PAIRING
with
. Choose Pinpointer logo with
and .
Switch on the MI-6 whilst holding its button down for eight seconds. You will see the
serial number of your pinpointer displayed on the WS6. Then switch on the MI-6 so
that it works with WS6 MASTER.
When pairing, the MI-6 automatically switches to program 7. This program will only
work with the detector and headphones. In this program the MI-6 will not generate
any sound or vibration through it’s own speaker (MI-6 manual).
Pairing the MI-6 Pinpointer
>
PAIRING
, Pinpointer logo choose
UNPAIR
, then and finally .
To use the MI-6 without the , select programs 1 to 6 on the MI-6 menu. To
change program : Switch MI-6 on - press the button for 5 seconds, an audio chime
indicates that you have entered the program selection mode. Press to correspond
with the desired program number (e.g. press twice for program 2). After 2 seconds
the audio chime indicates the MI-6 has returned to search mode.
Delete the MI-6
START
AUTO.
To Next Page
Loading...
Need help?
General
