9
Only Wireless Shortcut Remote Supported
Plug the Bluetooth receiver into the computer and slide the power switch, with the
indicator light always on in blue. The blue indicator will be off after 30 seconds.
*If the Bluetooth receiver needs to re-pair with the device, please download the wireless
pairing tool from the official website of XPPen (https://www.xp-pen.com) according to the
product model, and refer to the operation guide for pairing connection.
Bluetooth Device Switching
The drawing tablet supports connection to two Bluetooth devices.
1. With the drawing tablet on, toggle the Bluetooth switching button to position 1, long
press the power button for 6 seconds, and the drawing tablet is paired with device 1.
2. With the drawing tablet on, toggle the Bluetooth switching button to position 2, press
and hold the power key for 6 seconds, and the drawing tablet is paired with device 2.
3. Toggle the Bluetooth switching button to switch the Bluetooth connection between the
two devices.
To Next Page
Loading...
