© XPAND, All Rights Reserved. 8 www.xpand.me
Each time the XPAND X103-EDUX3 glasses are turned ON, they
start in 3D Mode (Normal 3D or Inverted 3D). The Dual View Mode
selection is not stored into the memory.
Battery Low Indication
If LED light (2) and shutters flash at power on, battery level is
low. Glasses will continue to operate normally until the battery is
completely discharged.
Battery Replacement
» Step 1: Open battery compartment
» Step 2: Take out the battery
» Step 3: Insert new battery
» Step 4: Close the battery compartment
Troubleshooting
The glasses don’t work: Make sure that the glasses are turned on.
If problems persist try to turn the ambient lights off or shade the
windows if intensive sunlight is present. Make sure that your 3D
device is set to 3D DLP-Link™ mode. Get closer to the screen.
xpand-X103-edux3-manual.indd 8 14.6.2012 10:21:38
To Next Page
Loading...
Need help?
General
