Need help?Do you have a question about the Xprinter XP-420B and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Max Print Width | 108 mm |
| Max Print Speed | 127 mm/s |
| Interface | USB, Serial, Ethernet |
| Media Type | Black Mark, Continuous, Fan-fold |
| Memory | 8 MB SDRAM |
| Sensors | Gap, Black Mark |
| Media Thickness | 0.06 - 0.254 mm |
| Power Supply | AC 100-240V |
Obtain the driver software from the provided web link.
Save the downloaded ZIP file into a created folder.
Accept the terms in the license agreement to proceed with installation.
Select the directory to unpack the software for installation.
Choose to install printer drivers from the Seagull Driver Wizard.
Connect the printer to the PC via USB and confirm detection.
Assign a name to the printer and choose sharing options.
Insert the paper roll and secure it using the paper spindle and clips.
Press the feed button until the LED changes color for paper size detection.
Navigate to device settings and open printer preferences.
Select the 4x6 (4.00in x 6.00in) paper size for A6 labels.
To Next Page
