4
EQUIPMENT REQUIRED
TOOLS REQUIRED
TOOLS & EQUIPMENT INCLUDED
SYMBOLS USED
XRAY Silicone Shock
Transmitter Steering & Throttle Servos
Receiver & Personal
Transponder
Battery Charger Tires
Turnbuckle Tool
Starter Box & Battery Pack
Manifold & Exhaust
Engine
Tape
Transmitter Batteries Air Filter & Oil
Tire Truer
(HUDY #102003)
Receiver Battery PackModel R/C Car Fuel
(nitromethane)
Threadlock & CA Glue
Glowplug Igniter
HUDY TOOLS
Reamer
(HUDY #107600)
Wrench Glowplug/Clutchnut
(HUDY #107581)
Shockabsorber Assembly Tool
(HUDY #183010)
Phillips 3.5mm
Allen Ball 2.5mm
Socket 7.0mm
Allen 3.0 / 2.5 / 2.0 / 1.5mm
Pinion Tools
(HUDY #182001 & 182002)
Flywheel Tool
(HUDY #182010)
Pliers Scissors Side Cutters Hobby Knife
Lexan Paint
200mm Bodyshell
#309500 Grease
#309580
One-Way Lube
XRAY Silicone Diff Oil
Apply cyanoacrylate
(CA) glue
TOE-IN
Follow Set-Up Book
Part bags used Assemble left and right
sides the same way
Assemble in the
specified order
Pay attention here Assemble as many times as
specified (here twice)
Apply thread lock
➊➋➌
BAG
Number of teeth
Apply oil
(may indicate specific type)
Follow tip here Cut off remaining
material
Apply grease Ensure smooth
non-binding movement
To Next Page
Loading...
