10
1. REAR GEAR DIFFERENTIAL
GEAR DIFF ADJUSTMENT
DETAIL
Wait approx. 5min
Rotate
Push down
971240
O 24x0.7
903258
SFH M2.5x8
Tighten the screws equally but do
NOT tighten them completely.
Finish tightening in this order.
➊
➋
➌
➍
After disassembling the differential, the large O-ring
may have an increased size and may be more difficult to
re-install. We recommend either replacing the O-ring with
a new one or carefully re-inserting the old O-ring in the
diff cover.
964031
S 3.5x10x0.2
#335081
ALU DIFFERENTIAL PIN - HARDCOATED (2)
To Next Page
Loading...
