INITIAL
SETTING
DETAIL
25
5. FRONT SUSPENSION
902205
SH M2x5
902312
SH M3x12
981210
P 2x10
306219
SHIM 3x6x1
➊
➋
➌
2x
L=R
2x
2x
L=R
L=R
LOWER ROLL CENTER
(INITIAL SETTING)
TOP = LONGER bushing
BOTTOM = SHORTER bushing
Recommended for rough tracks
to improve stability.
LESS CASTER = increased steering off-power
MORE CASTER = less steering off-power
CASTER ECCENTRIC BUSHINGS
0º
2.5º
2.5º
5º
HIGHER ROLL CENTER
TOP = SHORTER bushing
BOTTOM = LONGER bushing
Recommended for smooth tracks
to gain more steering.
Steel steering
bushings allow
ROLL CENTER
adjustment.
Longer
Shorter
➊
➊
➋
➌
➌
NOTE
ORIENTATION
DETAIL
3x6x1mm
NOTE
ORIENTATION
CUTAWAY VIEW
DETAIL
OPTIONAL HEX HUB EFFECTS
Different off-set hex hubs are used to
increase or decrease the track-width.
MORE OFF-SET
less steering
LESS OFF-SET
more steering
902254
SH M2.5x4
C-HUB
#322210-M RIGHT MEDIUM INCLUDED
#322210-H RIGHT HARD OPTION
#322210-G RIGHT GRAPHITE OPTION
#322220-M LEFT MEDIUM INCLUDED
#322220-H LEFT HARD OPTION
#322220-G LEFT GRAPHITE OPTION
MEDIUM - For low traction. More steering on low grip.
HARD - For medium traction. More steering, more
free in corners.
GRAPHITE - For high traction. More precise steering, less
stoping in corners.
WHEEL HEX HUBS 12MM
#365360 +4.5mm 6 slots OPTION
#365359 +3.75mm 5 slots OPTION
#365358 +3.0mm 4 slots OPTION
#365357 +2.25mm 3 slots OPTION
#365356 +1.5mm 2 slots OPTION
#365355 +0.75mm 1 slot OPTION
#365353 0mm 0 slots INCLUDED
#365354 - 0.75mm Lightw. OPTION
#365361 -1.25mm Lightw. OPTION
961025
S 2.5
To Next Page
Loading...
