Need help?Do you have a question about the Xray SCX and is the answer not in the manual?
General| Brand | Xray |
|---|---|
| Model | SCX |
| Category | Motorized Toy Car |
| Language | English |
General safety guidelines and precautions for operating the model.
Legal limitations of XRAY's liability regarding product use.
Components and parts included within the model kit.
Additional equipment and components required to operate the model.
Explanation of color coding used for parts identification in the manual.
Guide on servicing drive shaft pins to ensure longevity and performance.
Specifications and options for the gear differential case.
Specifications and options for the gear differential pulley.
Information on the XRAY Active Differential set.
Details on the Ball Adjustable Differential, LCG, HUDY Spring Steel.
Instructions for bevel and satellite gears and pins.
Tips for adjusting the rear differential for different traction conditions.
Detailed breakdown of the Ball Adjustable Differential components.
Information on the Rear Drive Shaft with specific pin and material.
Details on ceramic balls used in the differential.
Information on slipper clutch spur gears.
Details regarding the 2-pad slipper clutch system.
Information on the solid axle, LCG, lightweight set.
Details for the front motor gear box, LCG, graphite.
Information on the slipper eliminator set.
Details on the slipper eliminator spur gear.
Guide for adjusting differential height for optimal performance.
Specifications and options for rear suspension arms.
Information on composite servo shims.
Details on SCX composite front and rear bumpers.
Details for the composite medium rear suspension arm.
Details on the SCX ALU chassis with bent sides.
Information on composite eccentric bushings and their placement.
Adjustment parameters for rear suspension tuning.
Information on 12mm wheel hex hubs and their effects.
Details on rear uprights and their material options.
Explanation of how hex hub offsets affect car handling.
Information on the rear roll center holder.
Details on rear anti-roll bars and their specifications.
Information on front lower arm mount options.
Details on steering arms and their material options.
Information on the composite steering plate.
Details on the front lower chassis brace and its traction effects.
Information on 12mm wheel hex hubs and their effects.
Information on the front roll center holder.
Details on steering block options.
Information on C-hub options and their effects.
Details on suspension arm material options.
Guide for setting a lower roll center for stability.
Guide for setting a higher roll center for steering response.
Information on caster eccentric bushings and their effects.
Details on roll center links and their adjustments.
Information on steering links and their installation.
Detailed view of shock pistons and hole configurations.
Specifications and options for front shock springs.
Specifications and options for rear shock springs.
Details on ALU shock cap-nuts with vent holes.
Information on ALU shock spring retaining collars.
Step-by-step guide to setting the shock rebound to 0%.
Information on the front body mount set.
Details on the composite higher servo mount.
Information on HUDY aluminum servo horns.
Details on HUDY clamp aluminum servo horns.
Information on the composite servo saver.
Information on body post options and their height adjustments.
List of XRAY pinions with tooth count and pitch.
Procedure for adjusting motor pinion mesh without the upper brace.
Guide for setting battery position for initial configuration.
Information on the body mount set options.
Procedures for maintaining shock absorbers for consistent performance.
Guide on cleaning, lubricating, and maintaining ball bearings.
Recommended HUDY oils and greases for maintenance.
Maintenance checks for suspension and drivetrain components.
Information about the properties of HUDY Spring Steel material.
To Next Page
