Xray SCX - BATTERY POSITION SETTING

35
7. FINAL ASSEMBLY
ORIENTATION FOR
STANDARD BATTERY PACK
NOTE ORIENTATION
for STANDARD BATTERY PACK
ORIENTATION FOR
LOW BATTERY PACK
NOTE ORIENTATION
for LOW BATTERY PACK
To ensure correct functioning of the
battery holder, do not overtighten the
screw; the holder must be able to move.
To ensure correct functioning of the
battery holder, do not overtighten the
screw; the holder must be able to move.
901308
SB M3x8
902325
SH M3x25
Double-sided Tape
HUDY #107875
(NOT INCLUDED)
Receiver
(NOT INCLUDED)
Speed Controller
(NOT INCLUDED)
BATTERY WEIGHT
#326181 35g - OPTION
#326182 17g FRONT OPTION
#326183 17g FRONT-MIDDLE OPTION
#326184 7g MIDDLE OPTION
Battery
(NOT INCLUDED)
TIGHTEN GENTLY
Do not overtighten the screw to avoid
side guard damage.
For INITIAL SETTING use the battery position
setting maximum in rearward position.
HEIGHT ADJUSTMENT
1 turn = 0.5mm
BATTERY POSITION SETTING
960032
NUT M3
Do not overtighten the screw to avoid
side guard damage.
TIGHTEN GENTLY