34
7. FINAL ASSEMBLY
902306
SH M3x6
903310
SFH M3x10
902310
SH M3x10
902316
SH M3x16
NOTE
ORIENTATION
Pinion & Set screw
(NOT INCLUDED)
Adjust the motor so the pinion
meshes with the spur gear
properly. Make sure the gear
mesh is not too tight.
There should be a small amount
of play between the teeth of the
pinion gear and the spur gear.
The screw must be used even though the brace is not mounted. Make sure
to not overtighten the screw. The screw cannot stick out past the gearbox.
XRAY PINIONS (48P)
#365718 18T
#365719 19T
#365720 20T
#365721 21T
#365722 22T
#365723 23T
#365724 24T
#365725 25T
#365726 26T
#365727 27T
#365728 28T
#365729 29T
#365730 30T
#365731 31T
#365732 32T
#365733 33T
#365734 34T
#365735 35T
#365736 36T
#365737 37T
#365738 38T
DETAIL
IMPORTANT
3x10mm
3x16mm
ADJUSTMENT WITHOUT UPPER BRACE
UPPER BRACE
INCORRECT
CORRECT
Motor
(NOT INCLUDED)
To Next Page
Loading...
