Xray T3 User Manual

10
TOE-IN ADJUSTMENT
TRACK-WIDTH ADJUSTMENT
WHEELBASE ADJUSTMENT
ROLL CENTER ADJUSTMENT
SQUAT ADJUSTMENT
TOE-IN ADJUSTMENT
TRACK-WIDTH ADJUSTMENT
WHEELBASE ADJUSTMENT
ROLL CENTER ADJUSTMENT
SQUAT ADJUSTMENT
DETAIL
0mm
DETAIL
0mm
2. FRONT & REAR SUSPENSION
47.5 mm
3x16mm
50.5 mm
THIN COMPOSITE SHIM
3x6x1mm
3x14mm (EU RUBBER-SPEC)
3x16mm ((US FOAM-SPEC)
3x16mm
2x 1:1
L=R
L=R
2x
3x16mm
L=R
REAR LEFT ARM
Roll Center Position:
-0.75mm
Roll Center Position:
0mm
Roll Center Position:
+0.75mm
Use these suspension holders for initial assembly
Roll Center Position:
-0.75mm
Roll Center Position:
0mm
Roll Center Position:
+0.75mm
FRONT LEFT ARM
FRONT RIGHT ARM
303129
SHIM 3x6x1
902316
SH M3x16
303129
SHIM 3x6x2
303132
SHIM 3x7.5x0.75
902314
SH M3x14
902316
SH M3x16
303134-K
SHIM 3x7.5x1.5
THICK ALU SHIM
3 x 7.5 x 1.5mm
303134-K
SHIM 3x7.5x1.5
303129
SHIM 3x6x1
THICK COMPOSITE SHIM
3x6x2mm
THIN COMPOSITE SHIM
3x6x1mm
THICK ALU SHIM
3 x 7.5 x 1.5mm
THICK ALU SHIM
3 x 7.5 x 1.5mm
THIN COMPOSITE SHIM
3x6x1mm
It is extremely important that
the arms move freely on the
pivot pins. If they do not, use
the #107633 HUDY Arm
Reamer to slightly resize the
holes in the arms.
It is extremely important that the arms move freely
on the pivot pins. If they do not, use the #107633
HUDY Arm Reamer to slightly resize the holes in
the arms.
Use these suspension holders for initial assembly
THIN BLACK STEEL SHIM
3 x 7.5 x 0.75mm
use only for US FOAM-SPEC
DETAIL
THICK ALU SHIM
3 x 7.5 x 1.5mm
use only for US FOAM-SPEC
DETAIL

Xray T3 Specifications

General

Brand	Xray
Model	T3
Category	Motorized Toy Car
Language	English