25
901304
SB M3x4
ANTI-ROLL BARS
901302
SB M3x2.5
5. FRONT & REAR TRANSMISSION
FRONT ANTI-ROLL BAR
FRONT ANTI-ROLL BAR
When the bars are set, verify that
both sides move at the same time.
If they do, the bars are set up
correctly. If not, make sure that
both downstops are the same and
that the bar wire is flat.
If both sides still do not
move at the same time,
adjust the length of the
bar holders.
3x4mm
3x4mm
3x2.5mm
3x2.5mm
L=R
DETAIL
CENTER
DETAIL
Set the bar into the center, remove the play in the bushings, and
tighten the set-screws fully.
To Next Page
Loading...
