31
903308
SFH M3x8
903310
SFH M3x10
960030
N M3
902308
SH M3x8
7. FRONT & REAR ASSEMBLY
#301232
T4 FOAM BUMPER WIDE - HARD
ALU SHIM 4x6x2mm
FRONTWARDREARWARD CENTER
(INITIAL SETTING)
BODY POST ORIENTATION
INITIAL SETTING
DETAIL
3x10mm
It is important to use the same body setting
(rearward, center, frontward) both on front and
rear body posts at the same time.
This new, innovative & unique feature allows adjustment of the body position for all kind of surfaces, traction conditions, touring classes, using only one body. There are
three different body positions; rearward, center, and forward. Depending on the conditions the body posts position can be easily changed which allows the body to be moved.
• The body in the REARWARD POSITION makes the car super stable and very easy to drive. It makes the car easier to drive over chicanes and be more predictable in
high-traction conditions.
• The body in the CENTER POSITION makes the car more aggressive and steer faster, but is a bit more difficult to drive in low-grip conditions.
• The body in the FORWARD POSITION is the most aggressive. It makes the car steer a lot, but is more difficult to drive when the traction is high or when the track has a
lot of chicanes.
3x10mm
3x8mm
3x10mm
3x10mm
#301210
GRAPHITE UPPER HOLDER FOR BUMPER 2.5mm
(Alu shim 4x6x2mm - INCLUDED)
To Next Page
Loading...
